NEJE S1: IR 3W 1064nm endgepumptes DPSS Lasermodul, 3,5 kW Peak, Cu/Al/SS 0,5 mm
NEJE S1: IR 3W 1064nm endgepumptes DPSS Lasermodul, 3,5 kW Peak, Cu/Al/SS 0,5 mm
Verfügbarkeit für Abholungen konnte nicht geladen werden
Beschreibung
Der NEJE S1 verfügt über eine fortschrittliche 1064nm endgepumpte DPSS-Laserquelle, die eine Durchschnittsleistung von 3W und eine enorme Spitzenleistung von 3,5kW liefert. Im Gegensatz zu herkömmlichen fasergekoppelten gepulsten Quellen erzeugt das endgepumpte Design eine deutlich höhere Einzelpulsenergie, was sauberes Durchstechen und tiefe Gravuren auf anspruchsvollen reflektierenden Metallen ermöglicht.
Er bearbeitet mühelos 0,5mm Edelstahl, Aluminium und Kupfer. Die PWM-Leistungsregelung ermöglicht eine präzise Anpassung für feine Markierungen, während die Rotlicht-Unterstützung ein schnelles und genaues Fokussieren ermöglicht. Ein intelligenter, dynamisch anpassbarer leiser Lüfter hält die optimale Temperatur bei minimalem Geräuschpegel aufrecht. Kompakt, robust und wartungsfrei, bringt der S1 professionelle Metallbearbeitungsfähigkeiten in Ihren Arbeitsablauf.
Merkmale
【Endgepumpter DPSS 1064nm】Höhere Einzelpulsenergie als Standard-Faserlaser – überragende Absorption auf reflektierenden Metallen.
【3,5kW Spitze / 3W Durchschnitt】Enorme sofortige Spitzenleistung für sauberes Durchstechen von 0,5mm Edelstahl, Aluminium & Kupfer.
【PWM Leistungsregelung】Software-einstellbare Leistung für feine Markierungen, tiefe Gravuren und Graustufenbilder.
【Rotlicht-Assistenzfokus】Eingebaute sichtbare rote Führung für schnelle, präzise Brennpunkt-Ausrichtung des unsichtbaren 1064nm Strahls.
【Dynamischer leiser Lüfter】Intelligente Kühlung mit automatisch einstellbarer Geschwindigkeit – leiser Betrieb bei leichten Aufgaben, volle Kühlung unter Last.
【Robustes Kompaktdesign】Versiegelter DPSS-Resonator, stoßfest, für konstante Metallgravurleistung gebaut.
Can this module be used to cut Dibond panels? (A composite material consisting of a polyethylene core sandwiched between two thin painted aluminum sheets.)
I'd like to make illuminated inset-letter signs, with white acrylic letters recessed into a Dibond panel. Unfortunately, I can't achieve this with the E80 module.
Wow, very likely! This little guy may be small, but it throws sparks when cutting stainless steel, aluminum. It definitely handles thin aluminum layers without any issue.
Please don't do this to me! I already have two 5W bulbs, one 10W bulb, and one 20W bulb, and if you get the price right, this one will be a hit, so I have to buy it 🙂
It's alright. Truly valuable things are always worth the investment. Our original intention has always been to help users achieve more.
Would be a more then welcome extension for my Neje Max 4, which I use for my Viking longship project.
If you can produce high-quality projects with this module, I am confident we can meet your expectations. Although the standard retail price might be difficult for a business to justify, I would like to propose a special arrangement. We are eager to see NEJE modules explore more creative possibilities, and we want to support that.
I have been looking for something to cut thin metal (used)..... this would be a perfect upgrade....My wife and I have been wanting to do bird houses and this would be amazing for etching a copper roof and making accesories
During our testing, we successfully cut 0.5mm steel plate, and the process was quite intense—there were even sparks flying. Compared to fiber lasers, while it doesn't have the same high power output, it delivers significantly higher pulse energy. Therefore, if your goal is purely metal cutting, the efficiency might be insufficient. However, for deep engraving or creating pronounced marks on metal, this machine performs exceptionally well.
Is it possible to buy a 24v main board to enable use of this module on my Neje 3 max please?
As long as it supports 24V, it's fine. This module also runs on the 4-pin interface and is compatible with the E80.
- 5 stars: 6 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Can this module be used to cut Dibond panels? (A composite material consisting of a polyethylene core sandwiched between two thin painted aluminum sheets.)
I'd like to make illuminated inset-letter signs, with white acrylic letters recessed into a Dibond panel. Unfortunately, I can't achieve this with the E80 module.
Wow, very likely! This little guy may be small, but it throws sparks when cutting stainless steel, aluminum. It definitely handles thin aluminum layers without any issue.
Please don't do this to me! I already have two 5W bulbs, one 10W bulb, and one 20W bulb, and if you get the price right, this one will be a hit, so I have to buy it 🙂
It's alright. Truly valuable things are always worth the investment. Our original intention has always been to help users achieve more.
Would be a more then welcome extension for my Neje Max 4, which I use for my Viking longship project.
If you can produce high-quality projects with this module, I am confident we can meet your expectations. Although the standard retail price might be difficult for a business to justify, I would like to propose a special arrangement. We are eager to see NEJE modules explore more creative possibilities, and we want to support that.
I have been looking for something to cut thin metal (used)..... this would be a perfect upgrade....My wife and I have been wanting to do bird houses and this would be amazing for etching a copper roof and making accesories
During our testing, we successfully cut 0.5mm steel plate, and the process was quite intense—there were even sparks flying. Compared to fiber lasers, while it doesn't have the same high power output, it delivers significantly higher pulse energy. Therefore, if your goal is purely metal cutting, the efficiency might be insufficient. However, for deep engraving or creating pronounced marks on metal, this machine performs exceptionally well.
Is it possible to buy a 24v main board to enable use of this module on my Neje 3 max please?
As long as it supports 24V, it's fine. This module also runs on the 4-pin interface and is compatible with the E80.
Il fonctionne sur neje 3 max v2 ?